System Q; Audio Control - Kenwood KDC-W534 Instruction Manual

System Q

Selecting the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound
setting alternates.
Sound setting
Natural
Rock
Pops
Easy
Top 40
Jazz
• Change each setting value with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.
• When the value is set up by <Audio Control> (page 9),
"USER" is displayed.

Audio Control

1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Audio item
Display
Turn the [VOL] knob.
"NATURAL"
Adjustment Item
"ROCK"
Bass level
"POPS"
Middle level
"EASY"
Treble level
"TOP40"
Balance
"JAZZ"
Fader
Exit Audio Control mode (Volume control mode)
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and
[ATT] button.
Display Range
"BAS L" –8 — +8
"MID L" –8 — +8
"TRE L" –8 — +8
"BAL" Left 15 — Right 15
"FAD" Rear 15 — Front 15
English
9
|