Black Mask; Dimmer Level Adjustment - Kenwood KDC-PS9070R Instruction Manual

Press the FM button to change the setting number of times
higher, and press the AM button to change it lower. Settings
may be made from 1 to 3.
4
Press the MENU button to end the menu mode.
NOTE
The "#" display in the Manual Open Switch Setting mode will
differ depending on the setting. The initial setting value is "1".

Black Mask

This function allows you to turn off the lower part of the
display if there is too much information in the display.
Turning the Black Mask On/Off:
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Black Mask function
appears in the display.
Pressing the 4 button results in the functions being switched
in the reverse order.
The function setting is indicated by "BLK MASK ON" or "BLK
MASK OFF" in the display, indicating that the Black mask is on
or off, respectively.
"BLK MASK ON" (The display will turn on by using only the
upper part of the display and the *ATT
indicator.)
"BLK MASK OFF" (The display will turn on by using the whole
part of the display.)
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
*...
KDC-8070R/8070W/7070R only
— 35 —

Dimmer level adjustment

You can adjust the Dimmer level of the unit separately when
your car's light switch has been turned on or off.
To adjust the Dimmer level:
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2 Press the ¢ button repeatedly until the Dimmer level
adjustment function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Bright ##" in the display,
indicating that the Dimmer level adjustment mode is on.
3
Switching settings
Press either the AM or FM button.
Press the FM button to change the setting values higher, and
press the AM button to change them lower. Settings may be
made from 0 to 10.
4
Press the MENU button to end the menu mode.
NOTE
The "##" display in the Dimmer level adjustment mode will differ
depending on the setting. The initial setting value whilst your
car's light switch is turned on is "5", and whilst the light is turned
off is "10".
Function of the KDC-PS9070R