Faceplate Angle Adjustment; Black Mask - Kenwood KRC-777R Instruction Manual

Faceplate Angle Adjustment

You can adjust the faceplate angle for easy viewing.
Adjusting faceplate angle:
Press the ¡ (EJECT) button to make the faceplate slide open,
and then adjust the faceplate angle using the angle adjustment
switch.
Adjustment may be made from 0 to 2.
0 1 2
0 1 2
NOTE
• Firmly slide the switch until it clicks.
• Do not apply excessive force to the faceplate under settings 1
or 2.

Black Mask

This function allows you to turn off the lower part of the
display if there is too much information in the display.
Turning the Black Mask On/Off:
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2 Press the ¢ button repeatedly until the Black Mask function
appears in the display.
Pressing the 4 button results in the functions being switched
in the reverse order.
The function setting is indicated by "BLACK MASK ON/BLK
MASK ON" or "BLACK MASK OFF/BLK MASK OFF" in the
0
2
1
— 33 —
display, indicating that the Black mask is on or off, respectively.
"BLACK MASK ON/BLK MASK ON"
(The display will turn on by using only the
upper part of the display and the ATT
indicator.)
"BLACK MASK OFF/BLK MASK OFF"
(The display will turn on by using the
whole part of the display.)
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.