Dimmer; Switching Graphic Display; Black Mask; Time Setting For Removing The Faceplate - Kenwood KRC-PS978R Instruction Manual

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.

Switching Graphic Display

You can turn the movement of graphic display on and off.
The initial setting is ON.
Display and setting:
"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.

Black Mask

This function allows you to turn off the lower part of the
display if there is too much information in the display.
Display and setting:
"BLK MSK/BLK MASK ON" : The display will turn on by using
"BLK MSK/BLK MASK OFF" : The display will turn on by using

Time setting for removing the faceplate

You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
only the part for letter display.
the whole part of the display.
Display and setting:
"OFF WAIT" : 0s / 3s / 5s / 10s / 15s / 20s / 25s (s=sec.)
NOTE
If you do not slide the faceplate lock switch during the period
which you have set, the unit's power turns off after the control
panel is automatically hidden.

Switching preout

Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately.
The factory default is rear preout.
Display and setting:
"SWPRE Rear" : Rear preout
"SWPRE N-Fad" : Non-fading preout
NOTE
You cannot use the high-pass filter with non-fading preout.
KEX/ec4/dB (Sound Coordinate system)
When this system is set to on, the sound coordinate factors
(Bass frequency, Bass quality, Bass extension, and Treble
frequency) appear during the audio control mode.
Display and setting:
"Kex/ec4/dB set ON" : The sound coordinate factors appear and
"Kex/ec4/dB set OFF" : The sound coordinate factors are not
— 33 —
Function of the KRC-878R
can be adjusted.
appeared.