Dimmer; Switching Graphic Display; Black Mask; Time Setting For Removing The Faceplate - Kenwood KDC-7080R/RV Instruction Manual

Cd-receiver
Table of Contents

Advertisement

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.

Switching Graphic Display

You can turn the movement of graphic display on and off.
The initial setting is ON.
Display and setting:
"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.

Black Mask

This function allows you to turn off the lower part of the
display if there is too much information in the display.
Display and setting:
"BLK MASK ON" : The display will turn on by using only the
upper part of the display and the IN
indicator.
"BLK MASK OFF" : The display will turn on by using the whole
part of the display.

Time setting for removing the faceplate

You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
Display and setting:
"OFF WAIT" : 0s / 3s / 5s / 10s / 15s / 20s / 25s (s=sec.)
NOTE
If you do not slide the faceplate lock switch during the period
which you have set, the unit's power turns off after the control
panel is automatically hidden.

KEX/ec4/dB (Sound Coordinate system)

When this system is set to on, the sound coordinate factors
(Bass frequency, Bass quality, Bass extension, and Treble
frequency) appear during the audio control mode.
Display and setting:
"Kex/ec4/dB set ON" : The sound coordinate factors appear and
"Kex/ec4/dB set OFF" : The sound coordinate factors are not

External Amp Control

Adjust the bass boost level of the external amplifier using the
main unit.
Display and setting:
"AMP BASS FLT" : Bass boost level is flat.
"AMP BASS +6" : Bass boost level is low (+6dB).
"AMP BASS +12" : Bass boost level is high (+12dB).
NOTE
As of December 1999, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
— 31 —
can be adjusted.
appeared.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-7080rKdc-7080rv

Table of Contents