Changing Language For Pty Function; Preset Tuning; Direct Access Tuning - Kenwood KDC-BT6544U Instruction Manual

Changing Language for PTY Function

Selecting the Program Type display language as
follows;
Language
English
French
German
1
Enter PTY mode
Refer to <PTY (Program Type)> (page 14).
2
Enter Changing Language mode
Press the [38] button.
3
Select the language
Turn the [AUD] knob or push it towards up or
down.
4
Exit Changing Language mode
Press the [38] button.

Preset Tuning

Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Press the [SEARCH] button.
2
Select a desired station in the memory
Turn the [AUD] knob or push it towards up or
down.
3
Recall the station
Press the [AUD] knob.
Cancelling Preset Tuning
Press the [SEARCH] button.
Display
"ENGLISH"
"FRENCH"
"GERMAN"
Function of remote control

Direct Access Tuning

Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
15
|
English