• "Made for iPod," and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.
• The "AAC" logo is a trademark of Dolby Laboratories.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under
license. Other trademarks and trade names are those of their respective owners.
• The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important BASICS that you read and observe Warning and Caution in this manual. GETTING STARTED • Please keep the manual in a safe and accessible place for future reference. 1 Select the display language Warning and cancel the demonstration...
BASICS Faceplate Remote control (RC-406) (supplied for Display window Remote sensor (Do not expose to Volume knob Loading slot bright sunlight.) Lights up when Bluetooth Pull out the connection is insulation sheet established. when using for the ( 12) first time. Detach button : Flashes when the unit enters searching status.
GETTING STARTED Set the clock and date Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob.
Page 5
REAR/ SUB-W: Selects whether rear speakers or a subwoofer are activated). connected to the line out terminals on the rear (through an external For details on how to update the firmware, see: amplifier). www.kenwood.com/cs/ce/ DISPLAY FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels. EASY MENU (For ON: Both display and button illumination change to white color when...
RADIO Other settings Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item (see the following table), then press the knob. Repeat step until the desired item is selected or activated. Press and hold to exit. To return to the previous setting item, press Search for a station Default: XX...
RADIO Preparation: PTY SEARCH 1 Press the volume knob to enter PTY language selection. Select [ON] for [BUILT-IN AUX]. ( 5) 2 Turn the volume knob to select the PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob. Start listening 3 Turn the volume knob to select the available Program Type (see the Connect a portable audio player (commercially available).
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. ( 24) For ANDROID: Applicable only when [BROWSE MODE] is selected.
While in ANDROID source, press 5 repeatedly. If you have many files, you can search through them quickly. BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC Turn the volume knob quickly to browse through the list PLAY application installed in the Android device.
Pandora® CD / USB / iPod / ANDROID (Not applicable for Korean models) Preparation: Other settings Install the latest version of the Pandora application on your device (iPhone/ iPod Press the volume knob to enter [FUNCTION]. touch), then create an account and log in to Pandora. Turn the volume knob to select an item (see the •...
Page 11
Pandora® (Not applicable for Korean models) Create and save a new station Delete a station Press While listening to PANDORA... Turn the volume knob to select [NEW STATION], then press the knob. Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then Turn the volume knob to select [SYSTEM], then press the knob.
– Bluetooth function of the connected device is turned on. supplied) if necessary. – [AUTO PAIRING] is set to [ON]. ( 16) – KENWOOD MUSIC PLAY application is installed on the Android device ( 8) and [BROWSE MODE] is selected ( 9).
Page 13
BLUETOOTH® BLUETOOTH — Mobile phone On the faceplate On the remote control First incoming call... Answer a call Press or the volume knob Press or one of the number buttons (1 to 6). Reject a call Press Press End a call Press Press While talking on the first incoming call...
Page 14
BLUETOOTH® Default: XX Improve the voice quality While talking on the phone... SETTINGS Press the volume knob to enter [FUNCTION]. AUTO ANSWER 1 — 30: The unit answers incoming call automatically in the selected time Turn the volume knob to select an item (see the following (in seconds). ;...
Page 15
BLUETOOTH® Make a call using voice recognition PHONE BOOK (Applicable only if the phone supports PBAP) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold to activate the voice recognition of the phonebook contains many contacts). connected phone.
Page 16
BLUETOOTH® Other settings Bluetooth test mode Press the volume knob to enter [FUNCTION]. You can check the connectivity of the supported profile between the Turn the volume knob to select an item (see the following table), then Bluetooth device and the unit. press the knob.
Page 17
BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Listen to Pandora (Not applicable for Korean models) You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA SRC]. ( 5) Open the Pandora application on your device. Audio player via Bluetooth Connect your Bluetooth audio player via Press...
AUDIO SETTINGS While listening to any source... LOUDNESS LEVEL1/ LEVEL2 or LV1/ LV2: Selects your preferred low and high Press the volume knob to enter [FUNCTION]. frequencies boost to produce a well-balanced sound at a low volume Turn the volume knob to select [AUDIO CONTROL], then press the level. ;...
Page 19
AUDIO SETTINGS 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and 3-way SPEAKER SIZE crossover. FRONT SIZE 8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10 SPEAKER SIZE Selects according to the connected speaker size for optimum TWEETER SMALL/ MIDDLE/ LARGE/ NONE (not connected) performance.
TROUBLESHOOTING DISPLAY SETTINGS Default: XX Symptom Remedy COLOR (For • Adjust the volume to the optimum level. Sound cannot be heard. SELECT Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. • Check the cords and connections. 1 Select a zone. ( 20) “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of 2 Select a color for the selected zone.
Page 22
Symptom Remedy Symptom Remedy • This unit can only display uppercase letters, numbers, • Make sure KENWOOD MUSIC PLAY APP is installed on Correct characters are not Cannot playback at displayed (e.g. album and a limited number of symbols. [BROWSE MODE].
Page 23
TROUBLESHOOTING Symptom Remedy Symptom Remedy • Search from the Bluetooth device again. No Bluetooth device is “DEVICE FULL” The number of registered devices has reached its limit. • Reset the unit. ( 3) detected. Retry after deleting an unnecessary device. ( 16, DEVICE DELETE) •...
- iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus General • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • This unit can only play the following CDs: • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
Page 25
REFERENCES About Pandora Change the display information • Pandora is only available in certain countries. Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears. Please visit <http://www.pandora.com/legal>...
INSTALLATION / CONNECTION Warning Installing the unit (in-dash mounting) • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car Do the required wiring.
If no connections are made, do not let the wire come out from the tab. White/Black crossover: Mid range speaker (left) Gray To connect the Kenwood Brown To front speaker (right) / For 3-way (D) Wiring harness navigation system, refer your...
SPECIFICATIONS FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) Dynamic Range 90 dB Channel Space Selection 50 kHz Channel Separation 85 dB Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) WMA Decode Compliant with Windows Media Audio Frequency Response (±3 dB)
Page 29
SPECIFICATIONS The marking of products using lasers Frequency Response (±3 dB) 20 Hz — 20 kHz The label is attached to the chassis/case and says Input Maximum Voltage 1 000 mV that the component uses laser beams that have been Input Impedance 30 kΩ classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class.
Page 32
ﺍﻟﻤﻮﺍﺻﻔﺎﺕ 02 ﻫﺮﺗﺰ — 02 ﻛﻴﻠﻮ ﻫﺮﺗﺰ (ﺍﺳﺘﺠﺎﺑﺔ ﺍﻟﺘﺮﺩﺩ )3± ﺩﻳﺴﻴﺒﻞ The marking of products using lasers The label is attached to the chassis/case and says 000 1 ﻣﻠﻠﻲ ﻓﻮﻟﺖ ﺍﻟﺠﻬﺪ ﺍﻷﻗﺼﻰ ﻟﻠﺪﺧﻞ that the component uses laser beams that have been classified as Class 1.
Page 60
• The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.