Hands Free Unit Control; Control Screen Function - Kenwood KOS-V500 Instruction Manual

Hands Free Unit Control

• You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual
of the Bluetooth Hands Free Box as well.

Control Screen Function

Displaying the control screen and using various
functions.
1 Display the control screen
MODE/TOP MENU
ROUTEM
AV OUT
VIEW
Press several times until the Control Screen
appears.
2 Display the source select screen
1
1 Displays the status of connection with the
cell-phone.
White: The cell-phone is connected.
Orange: The cell-phone is not connected,
or it is outside the service range.
3 Display the Hands-Free Control screen
NAVI
FNC/MENU/PBC AUDIO RETURN
VOICE CANCEL
OPEN SUBTITLE
MAP DIR
ANGLE
FM +
16
2
3
4
5
14
8
2 Displays the Search for Phone Book screen.
(See <Calling by Phone Book>, page 51)
3 Displays the Out Going Calls screen.
(See <Redialing>, page 53)
4 Displays the Incoming Calls screen.
(See <Redialing>, page 53)
5 Switches between the private and hands-
free modes (only when a call in progress).
6 Displays the Hands-Free Set Up screen.
(See <Setting up the Hands-Free Phone>,
page 54)
7 Enter three phone numbers for quick
dialing.
(See <Quick Dialing>, page 51)
8 Enters a phone number.
(See <When Dialing>, page 50)
9 Displays the signal strength.*
The more the number of bar segments, the
stronger the signal.
p Displays the present Auto Answering status
When Auto Answering is on:
When Auto Answering is off:
q Displays the battery drain of the cell-
phone.*
The more the number of bar segments, the
higher the battery level.
w Starts the call.
e Ends the call.
Clears the phone number being entered.
r Clears the entered phone number.
t Returns to the previous screen.
y Displays the calling and called phone
numbers.
If you have registered a phone number in
the Phone Book, the destination person
name is displayed.
9 10 11
12
13
7
6
15
AUTO
Next page 3
English 49