System Setup; Av Interface Setup - Kenwood KOS-V500 Instruction Manual

Setup Menu

System Setup

You can set up the system parameters.
1 Display the System SETUP screen
Touch [System SETUP] in the SETUP Menu
(page 56).
2 Setup each item
1
2
3
1 Turns the key touch tone On or Off. (
2 Allows scrolling of text display on the
Source Control screen. (
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
3 Selects a remote control signal. (
When turned "Off", the remote control of TV
reception is rejected.
4 Returns to the original screen.
5
6
5 Controlling the built-in amplifier.* (
"On": Uses the built-in amplifier.
"Off": Uses the optional amplifier
connected to this unit.
6 Sets the tuner source.* (
"On": Uses the built-in tuner to receive a
radio station.
"Off": Uses the tuner of your vehicle to
receive a radio station.
7 Returns to the original screen.
58 KOS-V500
⁄
• * In order to receive a radio station with the built-in
• * Setting can be made only in standby mode.

AV Interface Setup

You can set audio and visual (AV) interface
parameters.
1
2
4
On)
Manual)
On)
7
On)
On)
tuner, you need to connect an antenna cord. Refer to
<Connection> (page 82).
Display the AV Interface screen
Touch [AV Interface] in the SETUP Menu
(page 56).
Setup each item
1
2
3
4
1 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT1 port. ( VIDEO1)
⁄
• If you have set the navigation system connection
to "AV-IN", the display is fixed to "NAV1".
2 Sets an image display of the system that is
connected via the AV INPUT2 port. (
"Off": When the image source is switched,
an image entered via the AV INPUT2
port is displayed.
"On": When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
3 Sets a name to be displayed when you
select an image of the system that is
connected via the AV INPUT2 port.
( VIDEO2)
5
Off )