Kenwood KOS-V500 Instruction Manual page 9

Advanced integration av controller
Hide thumbs Also See for KOS-V500:
Table of Contents

Advertisement

About Picture files
Acceptable picture files
• Format: JPEG
• Baseline format:
Up to a maximum of 8192(W) × 7680(H) pixels
• Progressive format:
Up to a maximum of 1600(W) × 1200(H) pixels
• Enlarges and reduces images up to the size shown above
to fit to the screen.
• The picture files with information attached (such as Exif )
may not be displayed or operated (e.g.: rotation display)
properly.
Extensions
Picture files must have one of the following
extensions:
jpg, jpeg, jpe
About USB device
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
System start up setting
You need to go through the setup for AN-IN,
Inner AMP, and Tuner source when the unit is
installed or the reset button is pressed.
1
Start system start up
2
Setup each item
Set up by referring to <AV Interface Setup>
(page 58).
Set up by referring to <System Setup> (page
58).
3
Returns to the original screen
English
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents