Setup; Unfolding The Handle - Toro 20959 Operator's Manual

Setup

Important:
Remove and discard the protective
plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
1

Unfolding the Handle

No Parts Required
Procedure
WARNING
Unfolding the handle improperly can damage
the cables, causing an unsafe operating
condition.
• Do not damage the cable(s) when folding
or unfolding the handle.
• Ensure that the cable(s) are routed to the
outside of the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Move the handle rearward to the operating
position (Figure 3).
1. Handle lock engaged
position
2. Set the handle lock
in place to lock the handle into the operating
position.
1. Handle lock
5
Figure 3
2. Handle lock disengaged
positions
(Figure 4) until the pin clicks
Figure 4
2. Pin
g189174
g189175