Toro 20959 Operator's Manual page 17

Figure 21
2. Ensure that the cutting-height setting on the
machine is 92 mm (3-5/8 inches) or lower; if it is
not, lower it; refer to
(page 10).
3. Disengage the handle locks
Figure 22
1. Handle lock disengaged
positions
4. Fold the handle fully forward
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
5. Engage the handle locks.
6. Lift the front of the machine by the handle and
move it into a storage space
decal133-8198
Adjusting the Cutting Height
(Figure 22).
2. Handle lock engaged
position
(Figure 22).
(Figure 23).
g189218
16
Figure 23
g189217