Table of Contents
Advertisement
Lens Shift Adjustable Range
Vertical
Ceiling Front
Normal Position
Vertical
Desktop Front
Normal Position
"H" means the screen height.
Shift(%) = 100% + ((offset value H cm)/(1/2 height of screen cm) x 100)
Horizontal
Normal Position
"W" means the screen width.
High Brightness WXGA Projector
Installation Guide - Ceiling and Desktop mount -
©
Copyright
2009 TOSHIBA CORPORATION, All Rights Reserved.
0.5H
H
H
0.5H
0.1W
Lens Shift Range for Desktop and Ceiling Mount Application
The diagram below shows the location of the image position in the
lens. The lens can be shifted within the blue line area as shown
using the normal projection position as a starting point.
Note: Lens shift feature is not available with TLPSFL54 .
TLPSFL54 should be used only for "zero degree" / "no-offset"
applications.
W
Maximum Possible Range for Standard Lens / TLPSL54 /
TLPNL54 / TLPML54 / TLPLL54:
Up: 0.5H
Right: 0.10W
Left: 0.10W
(W: width of projected image, H: height of projected image)
0.1W
TDP-WX5400
Lens shift max
Normal Projection Position
Normal Projection Position
Lens shift max
12
Advertisement
Table of Contents
