7. Simulation launching system
No.
Operation Guide
Disconnect the davit hook from
suspension eye and connect it to
the ring for the sliding rope.
1
Note.
Weight load should not act on the
sliding rope.(only for safety)
<Activity on the ship>
Unravel the turn buckle until the
holding pin comes loose for
weight load not to act on it.
2
(Now, weight load acts on the
boathook ring only.)
.
Check the simulation launching
system by operating the sst ass'y
after removing the safety pin 1 &
2 .
<Activity on the ship>
3
Note.
If launching system is working
correctly, the boat will show free
fall status (short distance).
Weight load will act on the turn
buckle again.
Schematic Diagram
30