Inspection Procedure And Maintenance Plan For Boat - Hyundai HDFN35T Operation And Maintenance Manual

Table 6.2.1.1 - Inspection procedure and maintenance plan for boat
Items
Outside hull
Outside canopy
Buoyant lifeline
GRP
Inside boat
Wood
Metal
Drain valve
Release device
Painter release device
All hatches
Window
Steering gear
Stern tube
Propeller and guard
Breather valve
Clutch
Water
V-belt
spray sys-
tem
(only tank-
Spray pipe
er version)
Spray noz-
zle
Method Inspection procedure
Inspect for deformation or oth-
er defects. Inspect for peeling
Visual
or any damage of re-
tro-reflective material.
Inspect for deformation or oth-
Visual
er defects.
Visual Inspect for any damage.
Inspect for deformation or oth-
Visual
er defects.
Visual Inspect for crack or rot.
Visual Inspect for corrosion.
Visual Inspect for any damage.
Check resetting condition.
Visual Remove any dirt on moving
parts.
Check resetting condition.
Visual Remove any dirt on moving
parts.
Visual Inspect for easy operation and
Operation good condition of gasket.
Inspect for any crack on glass.
Visual
Clean both sides of glass.
Inspect for any damage of
Visual rudder, tiller and emergency
tiller.
Inspect for good operation of
main steering and connecting
Operation
emergency tiller.
Inspect gasket and check for
Visual
leakage of seawater.
Visual Inspect for any damage.
Operation Inspect operation of valve.
Inspect for proper tension of
V-belt. Inspect for any damage
Visual
of belt.
Operation Inspect for proper operation.
Inspect for corrosion or any
Visual
damage.
Visual Remove any deposit.
Mainten-
ance
Plan
W M Y
X X
X X X
X X
X X X
X X X
X X X
X X X
X X X
X X X
X X
X X
X X X
X X X
*2 *2 *2
X X X
X X
X X
X X
X X X
X X X
21