Operating Temperature; Installing And Removing The Lla34 - Tektronix 11A34 User Reference Supplement

Operating Temperature

and twc and can be stored in ambient temperature3 from 4P to t7sT. After
storage at temperatures

Installing and Removing the llA34

When in5taUed inany 11401/11402 plug-in comparbnent,
left or center plug-in compartment, the 1 IA34 will provide a conventional
display.
When in5iaUed in thecenter or right phig-incompartment of the 11301/11302,
the 11.43-i will ako provide theX (horizontal) part of an X-Y display, or
provide a tigger signal for the mainhame time base.
compartment, then b3-t the 111334 into themainframe until its front panel is
To remve the llA?A from a meimbme, Set the maikame ON-=ANDBY
switch to STANDBY. Then pull the release latch be fig. 1-I) to disengage
the unit from the IT Cnfmme, and pull the 11.434 stmight out of the plugin
outside the operating limits, Aow the chassis to reach
To awid instrument dmmgc set the mainframe ON/STANDBY
switch to STANDBY
plug-in unii$, use
To remove or reimfdl
To onceap'n enable the ON/STANDBYm'tch, r&the
STANDBY
the
the mainframe
the plug-in or
or in the i1301/11302
the