Vaisala MD30 Updating Software page 6

Quick Guide
Updating MD30 software over cable
connection
•
Laptop with Windows 10 operating system
•
Serial-to-USB cable for laptop connection (240884)
During the software update, MD30 must be connected to a power supply.
1. Download and extract the ZIP package on your laptop.
2. Remove the 8-m (26-ft) extension cable from your data collection system.
3. Connect the extension cable wires to the screw terminal of the serial-to-USB cable as follows
(pins 1, 2, and 4).
4. Connect the USB cable to your laptop.
5. When prompted, define the port to which MD30 is connected.
To check the port, select Start > Device Manager > Ports (COM & LPT)
6. On your laptop, select Start > Command Prompt.
7. Go to the folder where you extracted the ZIP package and double-click UpdateClient.exe.
6
POWER
Pin Label, serial-to- Wire color, MD30
USB cable extension cable
1
RS-232 Tx Brown
RS-232 Rx Green
2
3 -
4 GND OUT Yellow
5 -
6 -
M212537EN-A
-
-
-