Vaisala MD30 Updating Software page 2

Quick Guide
Updating MD30 software over Bluetooth
connection
•
Laptop with Windows 10 operating system and Bluetooth
During the software update, MD30 must be connected to a power supply.
1. Download and extract the ZIP package on your laptop.
2. Remove pairing between the RoadAI mobile phone and the Bluetooth module.
a. In the RoadAI app, select Sensor > Bluetooth pairing.
b. In Paired devices, select the Bluetooth module and the settings icon. Select Unpair.
3. Restart the Bluetooth module.
BM10 and BM10-NA Bluetooth modules:
a. Disconnect the power cable from the vehicle power outlet.
b. Reconnect the power cable.
BM10-RW Bluetooth module:
a. Remove the lid of the Bluetooth module enclosure.
b. Use a paper clip or similar to push the Reset button in the Bluetooth module.
2
M212537EN-A