R-Shroud; Side Led Lamp Cover - LG LSSB2691ST Service Manual

HOW TO DISASSEMBLE AND ASSEMBLE
9-5. R –SHROUD
1) Turn off the power of the
refrigerator (Press the POWER button
for 3 second to turn off the power).
2) Follow as shown [R-Water tank 4)]
3) Follow as shown Disassemble
compartment.
4) Remove the [R -Multi duct.]
5) turn the Water tank clockwise.
6) Remove 4 screws as shown below at the grille fan.And
separate grille fan
7) Separate 2 housings connected to inner case.
8) Remove 4 screws on the shroud assembly.And remove
shroud assembly.
9) Assembly is reverse order.

10. Side LED Lamp cover.

1) By use a flat head screwdriver at marked in red,pull the
LED lamp cover.
2) When assembly,assemble new LED lamp cover.
Because lamp cover is easily destroyed when
disassemle step.
11. Guide Rail
1) Firstly pull the rail fully, and Loosen the screw shown in
the Picture. Then you can disassemble Rail guide.
66