Table of Contents

Advertisement

HOW TO DISASSEMBLE AND ASSEMBLE
3. F - Door
CAUTION - Before remove the door, remove the foods on the
shelfs and empty the ice bucket.
1) Remove both side of screw, and separate lower cover.
2) Disconnect the water tube to the dispenser (Blue
Tubing).
3) Loosen the ground screw pointed in red
CAUTION - Work space is limited, so use a small screw or a
rachet.
4) Use offset rachet driver for loosen two screws in red
5) Open the Freezer door to full fully opened position
(130 degrees)
6) Loosen screw in red with rachet or small driver.
7) Pull the lead wire cover coming from the bottom of the
door.
8) Separate housing supporter.
9) Disconnect the all wire coming from the bottom of the
door.
10) Close the door.
11) Remove the top cover.
12) Loosen the bolts in red
CAUTION - Do not loosen the bolts in yellow.
Another worker hold the F-door.
13) Remove the upper bracket.
14) Raise the F-door and remove it.
15) Loosen two screws bottom of the F-door.
16) Split lead wire cover.
CAUTION - Do not discard the connector or the cover for the
water tubing an wires. Hold these for use when reinstalling the
door.
56

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lssb2692stLssb2692bdLssb2696stLssb2696bd

Table of Contents