HOW TO DISASSEMBLE AND ASSEMBLE
6-2. FUNNEL ASSEMBLY
1) Remove the screw fixing the button lever.
2) Pull out funnel assembly.
6-3. CAP DUCT
1) Remover the metal tab shown below to remover the duct
cap.
2) To install the duct cap assembly, insert one end
of the spring into the right hole of the
dispenser lever and insert the other end into
the right hole in the top part of the dispenser.
Then attach the holder at the cap duct motor.
Cap Duct Motor
Spring
Dispenser Lever
60
6-4. CAP DUCT MOTOR
1) Remove the duct cap motor housing.
2) Unscrew 3 screws to disassemble the motor.