Removing And Reinstalling The Main Parts - Sharp CD-C811W Service Manual

CP-C811W
STEP REMOVAL
1 Speaker 1. Net Frame ............... (A1) x1
2. Duct Panel .............. (A2) x1
3. Screw ...................... (A3) x4
Woofer
(A3)x4
(A1)x1
ø3x8mm
Net Frame
Figure 9-1

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1, 2, 3, and 11 ~15 of the disassembly method
to remove the CD mechanism.
How to remove the turntable up/loading/down
motor (See Fig. 9-3)
1. Remove the screws (A1) x 2 pcs., to remove the turntable
up/down/loading motor.
How to remove the pickup (See Fig. 9-4)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x 1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1 pc.
3. Remove the pickup.
Note:
After disconnecting the optical pickup connector, wrap the
front end of connector in conductive aluminum foil to prevent
damage to the optical pickup by static electricity.
PROCEDURE
Speaker Box
(A2)x1
Duct Panle
CP-C821W
FIGURE STEP REMOVAL
9-1 1 Speaker
(B1)x1
Net Frame
Turntable/Up/
Loading/Down Motor
Motor
PWB
– 9 –
CD-C811W/821W
PROCEDURE
1. Net Frame ............... (B1) x1
2. Duct Panel .............. (B2) x1
3. Screw ...................... (B3) x4
Speaker Box
Super Tweeter
Woofer
(B3)x4
ø3x8mm
(B2)x1
Duct Panle
Figure 9-2
Figure 9-3
Stop Washer
(B1) x2
(B3)x1
ø2.6x6mm
Shaft
Gear
(B2) x1
(B4) x1
Figure 9-4
FIGURE
9-2
(A1) x2
ø2.6x5mm
Pickup
CD Mechanism