Esetting The F Lag G Ear - Brother TN-310BK Remanufacturing Instructions

r
eseTTing The
Note: Reference the flag gear photos in Figure 32 to
determine if you have a low yield, high yield or extra
high yield cartridge. While the flag gears are different,
the toner cartridges are all physically identical.
Low Yield High Yield
1. Reinstall the flag gear as shown in Figure 33. Notice the location of
the flag gear tab.
F g
lag ear
Extra High Yield
Figure 32
Flag Gear
Flag Gear Tab
Cartridge Tab
Figure 33
2. Put the long arm of the spring over the flag gear and the short arm
of the spring under the cartridge tab as shown in Figure 34a. Final
assembly is shown in Figures 34a and 34b. Note the gear tab and
cartridge tab. Tabs are now slightly separated due to spring tension.
This is normal. Spent position Figure 34c.
Cartridge Tab
Gear Tab
Flag Gear
Spring
Figure 34a
Gear Tab
Flag Gear
Spring
Figure 34b
Cartridge Tab
Figure 34c
sss 1143 12
™
page