Advertisement
Connecting CV-920 to CV-350
Controller
When CV-920 is connected to CV-350 Controller, settings
must be done in the CAMS Software and in the CV-920
Keypad.
Example: Create a User to access with Card or PIN Code.
The Card Number is 8744987 and the PIN Code 12345.
Settings in the CAMS Software
1. In the CAMS Software, right click on the Reader and
select properties. In the Properties window select for
Type: "CV-920" (1.1)
2. Select the Wiegand 26 bit (1.2)
3. Press Save & Exit. In the event window a confirmation
message will appear as shown in (fig.2)
4. Adjust the PIN Length. Go to Settings/ System
parameters. For Keycode length select 5 digits. (fig3)
5. Go To Users Menu and select the user. In the Field
User ID (Card Number) write 8744987. In the Field
"Access Code" write the PIN Code 12345. Save the
User. (fig.4)
Settings in the CV-920
1. Enter the Menu of CV-920. Press B+000000.
2. Press 6, press 4. The Preset, programs the CV-920
Keypad to work with CV-350 controller in Wiegand
26bit.
3. Adjust the PIN Length. Press 4, then press 5. Type
12345 and access will be granted.
Push Buttons
Keypads
5502 Timberlea Blvd.,
Mississauga, ON Canada
L4W 2T7
Questions? Call us toll-free at 1-877-226-3369
Strikes
Magnetic Locks
www.camdencontrols.com
Toll Free: 1.877.226.3369
Key Switches
Page 5 of 5
CV-920 Series
fig.2
fig.3
fig.4
Relays & Timers
Access Control
File: CV-920 Series
Installation Instructions.indd R1
Revision: 06/05/2015
Part No.: 40-82B171
Advertisement
