Connecting An Audio System; Connecting An A/V Receiver - Toshiba 34HD82 Owner's Manual

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see "Turning off the built-in speakers"
on page 48).
You will need:
• one pair of audio cables
Note:
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).
For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.

Connecting an A/V receiver

This connection allows you to use an audio/video (A/V) receiver to
enhance your TV's sound.
If you have a system with Dolby Pro Logic
add to the realism of the sound by using the TV's internal speakers as
center channel speakers.
You will need:
• one coaxial cable
• one set of standard A/V cables
• one single audio cable for the audio center channel
From antenna
TV
I N
VIDEO-1 VIDEO-2
S-VIDEO
COLOR
STREAM
VIDEO
HD - 1
L/
MONO
L
AUDIO
AUDIO
R
R
From
Video OUT
Note:
Refer to the instructions provided with your A/V receiver for
details about your surround sound system.
When the Audio Center Channel ON/OFF switch is in the
ON position, the TV speakers will function only as center
channel speakers.
Adjust the volume for the center channel speakers using the
center level control on the A/V receiver.
To use the TV speakers as normal speakers, set the Audio
Center Channel ON/OFF switch to the OFF position.
14
® surround sound, you can
ANT(75 )
DVI / HDCP
IN
ANT-1 OUT ANT-2
ON
I N OUT
COLOR
STREAM
VIDEO
Y Y
HD - 2
VAR
AUDIO
L
L/
P P MONO
B B
L
AUDIO
CENTER
R
L CHANNEL IN
AUDIO AUDIO
P
P
R R
ON OFF
R
R
R
To TV IN From
Center OUT
To A/V Receiver
TV
I N
VIDEO-1 VIDEO-2
S-VIDEO
VIDEO
L/
MONO
L
AUDIO
AUDIO
R
R
Amplifier
Caution:
To avoid damaging the TV speakers:
• Turn off the TV before connecting or
disconnecting the Audio Center Channel
cable.
• Do not connect from the A/V receiver's
Center Speaker OUT (amplified signal) to
the TV's Audio Center Channel IN.
Dolby Pro Logic* surround sound
system connection example
Audio
OFF
VCR
Video
Left
speaker
Surround
speaker L
_________
*
Dolby Pro Logic is a registered trademark of
Dolby Laboratories Licensing Corporation.
ANT(75 ) DVI / HDCP
IN
ANT-1 OUT ANT-2
I N OUT
COLOR COLOR
STREAM STREAM
VIDEO
HD - 1 Y HD - 2 Y
VAR
AUDIO
L
L/
P
P MONO
B B
L
AUDIO
CENTER
R
L CHANNEL IN
AUDIO AUDIO
P P
R R
ON OFF
R R
R
L R
LINE IN
Video
LDP/DVD
Audio
A/V receiver
T V
Right
speaker
Surround
speaker R