Page 1
Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model number: Serial number: 23565732A...
Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions...
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings.
Page 4
Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 26) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen.
Important safety information ... 2–4 Introduction ... 6 Welcome to Toshiba ... 6 Exploring your new TV ... 6 Note regarding Quick Connect Guide ... 6 Connecting your TV ... 7 Note regarding picture quality ... 7 Connecting a VCR ... 7 Connecting a cable converter box ...
The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. This manual applies to model 34HDX82. The model and serial numbers are on the back of your TV. Record these numbers in the spaces provided on the front cover of this manual for your records.
(see page 13). NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: For GOOD picture quality: Use a standard yellow stereo A/V video cable. For BETTER picture quality: If your equipment has an S-video connector, use an S-video cable instead of a standard yellow video cable.
Connecting a cable converter box This connection allows you to watch basic and premium cable channels. To use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.
Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel. You will need: • two (or three, if satellite receiver is used) coaxial cables •...
This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. Your TV has ColorStream ® (component video) inputs. Connecting your TV to a DVD player with component video (such as a Toshiba ® DVD player with ColorStream ) can greatly enhance picture quality and realism.
Connecting a DTV receiver/set-top box with ColorStream ® (component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver/set-top box with component video can greatly enhance picture quality and realism.
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You can also record one TV channel while watching another TV channel. You will need: • two coaxial cables • two sets of standard A/V cables VCR1 From Antenna IN from ANT OUT to TV...
Connecting a device to the DVI/HDCP The DVI/HDCP input on your TV is designed to accept HDCP program material in digital form from EIA/CEA-861–compliant consumer electronic devices, such as a set-top box or DVD player equipped with a DVI-D digital single-link output connection. The DVI/HDCP input is designed for best performance with 1080i high-definition video signals.
Connecting an audio system This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers” on page 52).
Using the remote control Preparing the remote control for use Your Toshiba TV remote control has one dedicated TV mode and five universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The target devices and default devices being programmed for each mode...
Remote Control functional key chart Toshiba TV Cable Key Label (TV) (CBL/SAT) (CBL/SAT) LIGHT Lights the remote key, and toggles between enabled and disabled Illumination mode. SLEEP Sleep timer --- POWER Power Power 1/MOVIE Digit 1 Digit 1 2/SPORTS Digit 2...
Page 17
Toshiba TV Cable Key Label (TV) (CBL/SAT) (CBL/SAT) TV/VCR AM/FM DISC --- STOP REC** PIP CH PIP channel up/down PIP on/off MULTI Strobe STILL PIP Still SWAP PIP Swap LOCATE PIP Locate SOURCE PIP Source Notes: • “---” will send nothing.
Programming the remote control for use with your audio/video devices Device code setup 1. Refer to the Device code table on pages 20–21 to find the code for the brand of your device. If more than one code is listed, try each one separately until you find the one that works.
Using the volume lock feature (8000) For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls (VOL yz and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIO1/2 modes. For example, to lock the volume controls to always jump to the CABLE/SAT mode: 1.
Learning about the remote control The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the “Remote Control functional key chart” on pages 16–17. turns the TV on and off POWER allows access to the sleep timer (automatic TV shut-off) function SLEEP...
Setting up your TV Learning about the menu system After you have installed the batteries and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu system using the buttons on the TV or remote control.
Using the Quick Connect Guide The Quick Connect Guide automatically starts the first time the TV is turned on. This feature provides on-screen instructions to guide you through initial setup of your TV. To manually start the Quick Connect Guide and change the current settings: 1.
Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. To select a language: 1. Press MENU, and then press x or • until the SET UP menu appears.
Adding channels to the TV’s memory When you press Channel y or z, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below and on the next page to program channels into the TV’s memory.
Adding and erasing channels manually After you have automatically programmed all active channels into the TV’s memory, you can manually add or erase specific channels. To add or erase channels: 1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons.
Adjusting the tilt correction feature When you install or move the TV, the picture may suffer from color shading and/or picture tilt because of terrestrial magnetism. If either condition occurs, the following adjustment should be made for the best possible picture. To adjust the tilt correction: 1.
Using the TV’s features Adjusting the channel settings Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1. Select the first channel or video mode you want to view. 2.
Viewing the wide-screen picture formats You can view programs in a variety of picture sizes—Natural, Theater Wide 1, Theater Wide 2, Theater Wide 3, and Full. The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing. Select the picture size that displays the current program the way that looks best to you.
Page 33
Theater Wide 1 picture size • The picture is non-uniformly enlarged—the center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. • A small part of the picture at the top and bottom is hidden;...
Scrolling the Theater Wide picture (Theater Wide 2 and 3 picture sizes only) 1. Press PIC SIZE to select either Theater Wide 2 or 3 mode. 2. Press MENU, and then press x or • until the THEATER menu appears. 3.
Using the POP double-window feature The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR.
Switching the main and POP pictures Press SWAP while you are using the POP feature to switch the main and POP pictures. Freezing the POP picture Press STILL while you are using the POP feature to freeze the POP picture. To return to the moving picture, press STILL again. Using the favorite channel search function You can use the favorite channel search function to quickly scan your favorite channels (see “Programming your favorite channels”...
Using the LOCKS menu The LOCKS menu includes the V-CHIP, CH LOCK, VIDEO LOCK, and NEW PIN CODE functions. You can use these functions after entering the correct PIN code. Entering the PIN code 1. Press MENU, and then press x or • until the LOCKS menu appears.
Using the V-CHIP menu Some TV programs and movies include signals that classify the content of the program (dialog, language, sex, violence). The V-CHIP control feature in this TV detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup.
MPAA RATING (Independent rating rating system for movies) 1. From the LOCKS menu, select ENABLE BLOCKING. 2. Press x or • to select ON. 3. Press z or y to select MPAA RATING. 4. Press x or • to display the MPAA RATING menu. 5.
Unlocking programs temporarily 1. If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. After 4 seconds, the TV starts the favorite channel search function (see page 36). You can either unlock the program temporarily (see steps 2–4) or select an unlocked program to watch.
To unlock individual channels: 1. From the LOCKS menu, select CH LOCK. 2. Press x or • to display the CH LOCK menu. 3. Press yzx • to highlight the channel you want to unlock, and then press ENTER. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 LOCKS V CH I P ENABLE...
Using the front panel lock feature Lock the front panel buttons to prevent your settings from being changed accidentally (by children, for example). When the front panel lock is ON, all control buttons on the TV front panel (except POWER) do not operate. To lock the front panel buttons: 1.
Adjusting the picture Selecting the picture mode You can select from four picture modes: Sports, Standard, Movie, and Preference. Mode Picture Quality Sports Bright and dynamic picture (factory setting) Standard Standard picture setting (factory setting) Movie Movie-like picture setting (factory setting) Preference Your personal preferences* *(see “Saving your new preferences”...
Saving your new preferences You can save your PICTURE quality adjustments (contrast, brightness, color, tint, and sharpness) in the Picture menu PREFERENCE MODE. To save your new preferences: 1. Press MENU, and then press x or • until the PICTURE menu appears.
Selecting the Scan Velocity Modulation (SVM) The SVM feature enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW, and OFF. To select the SVM feature: 1. Press MENU, and then press x or • until the PICTURE menu appears. MODE 2.
Selecting the video input source Press INPUT on the remote control or TV/VIDEO on the TV to view a signal coming from another device connected to your TV, such as a VCR or video disc player. You can select ANT 1, VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, DVI, or ANT 2, depending on which input jacks are used for connecting your devices (see “Connecting your TV”...
Using the closed caption feature The closed caption feature has two options: • Captions—An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as “CC” in TV listings). • Text—An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations).
Setting the sleep timer To set the sleep timer to turn off the TV automatically: 1. Press SLEEP to set the length of time until the TV turns off. TIMER 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Every time you press SLEEP, the time will increase by 10 minutes, to a maximum of 180 minutes.
Adjusting the sound Muting the sound Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) the sound. While the sound is off, the screen will display “1/2 MUTE” or “MUTE” in the lower right corner. Each time you press MUTE, the mute mode will change in the following order.
Using the WOW™ surround sound feature ™ The WOW surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. WOW consists of three features—SRS 3D, FOCUS and TruBass—that use stereo signals from a TV broadcast or video input. •...
Turning off the built-in speakers Use this feature to turn off the TV speakers when you connect an audio system (see “Connecting an audio system” on page 14). To turn off the built-in speakers: 1. Press MENU, and then press x or • until AUDIO menu appears.
® Using the StableSound feature When the signal source is changed, the StableSound the highest volume level to prevent extreme changes in volume (for example, to prevent the extreme increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound ®...
Viewing the demonstration mode The demonstration mode demonstrates several of your TV’s features. To start the demo: Press and hold MENU on the TV for 4 seconds. To stop the demo: Press RECALL, EXIT, or POWER. Understanding the auto power off feature The TV automatically turns itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day.
Appendix Specifications Design and specifications are subject to change without notice. Television System NTSC standard Channel Coverage VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125) Power Source...
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem TV will not turn on No picture, no sound No sound, picture OK Poor picture, sound OK Poor reception of broadcast channels Cannot receive above channel 13 Black box appears on the screen Unable to select a certain channel...
WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. ® FST PURE is a registered trademark of Toshiba America Consumer Products, Inc. REV. MAR02...
ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. ® FST PURE is a registered trademark of Toshiba America Consumer Products, Inc. REV. MAR02...
Index A/V receiver connection ... 14 ANT 1/2 ... 25 Antenna cables ... 7 Audio cables ... 7 AUDIO OUT sound, selecting ... 52 Audio system connection ... 14 Auto power off ...54 BACKGROUND selection ... 53 Back of the TV ... 6 CableClear™...
Page 60
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500 MANUFACTURED BY CYCLONE is a registered trademark of Toshiba Corporation. ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products. CableClear and SurfLock are trademarks of Toshiba America Consumer Products, Inc. PRINTED IN USA...