Table of Contents
Advertisement
Connecting an audio system
This connection
allows you to use external
speakers with an external
audio amplifier
to adjust the sound
level.
To control
the audio,
turn on the TV and the stereo amplifier,
and
turn off the built-in
speakers
(see "Turning
off the built-in
speakers"
on page 52).
You will need:
• one pair of audio cables
Note:
Tohear sound when using an externalaudio amplifier, the
volume of both the TVand the amplifier must be set to a
moderate listeninglevel
Connecting an A/V receiver
This connection allows you to use an audio/video (A/V) receiver to
enhance your TV's sound.
lfyou have a sound system with Dolby Pro Logic surround sound,
you can add to the realism of the sound by using the TV's internal
speakers as center channel speakers.
You will need:
• one set ofstandardA/V
cables
• one single standard audio cable for the audio center channel
Caution:
Toavoid damaging the speakers
• Turnoffthe 7Vbefore connecting or
disconnecting the Audio Center Channel
cable.
• Do not connect from the A/Vreceiver's
amplified center speaker OUT to the TV's
Audio Center Channel I1_
TV
AN Receiver
Note:
Refer to the instructionsprovided withyour A/V receiver
for details about your surround sound system
When the Audio Center Channel ON/OFF switch is in
the ON position, the TVspeakers will function only as
center channel speakers
Adjust the volume for the center ebannelspeakers
using the center level control on the A/V receive_
Touse the TVspeakers asnormal speakers,set the
Audio Center Channel ON/OFF switch to the OFF
position
Dolby Pro Logic* surround sound
system connection example
__Audio
Video
-
_
TV
--
.eR
Right
_aker
_
_
_
_
speake
Surmund
Surmund
speakerL
6
speakerR
* "Dolby" and "Pro Logic" are trademarks of
Dolby Laboratories.
14
Advertisement
Table of Contents
