Operation
Changing Settings
Auto wand CLEAN
Set whether or not to clean the wand
automatically
1.
Press "Stop" button until all LEDs on the remote
control start fl ashing. (about 10 seconds)
2.
and
Press "Timer energy saver" button and "Setting
confi rmation" button at the same time.
The setting changes each time the button is
pressed once.
Set whether or not to clean the wand
automatically
When set to "ON"
Short beep
When set to "OFF"
Long beep
3.
Press "Stop" button.
Settings complete
*1 When "Auto wand clean" is set to "OFF", the "Wand CLEAN" LED turns off .
30
*1
Pre-mist
Set whether or not to spray mist in
the bowl unit automatically
1.
Press "Stop" button until all LEDs on the remote
control start fl ashing. (about 10 seconds)
2.
and
Press "Auto energy saver" button and "Setting
confi rmation" button at the same time.
The setting changes each time the button is
pressed once.
Set whether or not to spray mist in the bowl
unit automatically
When set to "spray"
Short beep
When set to "do not spray"
Long beep
3.
Press "Stop" button.
Settings complete