Maintenance
Maintenance
Descaling mode
Note: Cleansing modes (rear, rear soft and front) cannot be
used from step
1
until 60 minutes after step
performed. Toilet can be fl ushed.
If the work is delayed for more than 30 minutes between
steps
1
and 9, descaling agent will be drained to the toilet
with a long beep sound to alert.
If you want to stop the work between steps
power switch to "OFF", and then fl ip it to ON.
( Pages 33, 34)
Descaling agent will be drained to the toilet with a long beep
sound to alert. Cleansing modes (rear, rear soft and front)
cannot be used while the long beep sound is alerting.
If you have set "not making a beep sound", be sure to switch
to "making a beep sound" before starting the scale removal
mode. ( Page 32)
1.
and
Press "Stop" button and "Wand CLEAN" button at
the same time about 10 seconds or longer.
Water passage is drained.
(for about 30 seconds)
You will hear short beep sound.
Water comes out from around the wand.
"Power" LED (green) and "Energy saver"
LED (green) will fl ash.
(The LEDs will continue to fl ash until the
completion of the entire descaling process.)
When water draining is completed, you will hear
a long beep sound.
42
(Continued)
9
of descaling is
1
and 9, fl ip the
Descaling mode (1st time)
2.
Dilute agent with water.
( Please see How to dilute on page 41.)
3.
Open the lid and remove cover and cap on the top
face of product.
Cover
Attention
Please retain cover and cap.
2
5
–
Cap