Haier HD90-A636 User Manual page 20

Daily use
After drying
The tumble dryer stops operation automatically when a dry cycle is complete. The display
END.
shows
Notice
The last part of the drying cycle occurs without heat (cool down cycle) to ensure re-
maining the garments at a temperature which does not damage them.
26
28
30
32
Standby mode / power- saving mode
The switched on appliance will go into standby-mode if it will not be activated within 5
minutes before starting the programme or at the end of programme. This saves energy.
To interrupt the standby-mode push the "On/Off button.
20
1. Press "On/Off" button to switch off the appliance.
27
2. Remove laundry as soon as possible to go easy
29
3. Unplug the power cord (fig.: 28) .
4. Empty the water tank (fig.: 29).
5. Clean the lint filter in the filling opening (fig.: 30) .
31
6. Clean the condenser filter (fig.: 31) .
7. Open the door to prevent formation of moisture
(fig.: 26).
on it and to prevent more wrinkling (fig.: 27). If
the laundry is not removed the anti-crease pro-
gramme starts automatically. In anti-crease
phase, the drum will rotate 30 sec. in each 5.5
minutes, the total phase time will last for 1 hour.
and odours. Let it open while not used ( fig.: 32).
GB