Haier HD90-A636 User Manual page 19

GB
Switch on the appliance
Press the „on/off"- button to switch on the appliance.
(fig.: 22).
Select a programme
To get the best drying results, select a programme
which fits the dry level and sort of laundry type.
Turn the programme knob to select the right pro-
gramme (fig.: 23). The default settings light up in the
display. If there are options available, the option pro-
posed by the appliance will be displayed by a flashing
symbol. The display shows the time until the end of the
programme.
Notice
▶ After each switch-on, the appliance suggests the economical programme "Cotton-
Ready to Store" for drying normal wet cotton laundry.
▶ The displayed remaining time is a default value, this time will be re-calculated depend-
ing on additional programme settings and the moisture content of the laundry. See
SUGGESTIONS AND TIPS.
Additional settings
Choose additional settings (fig.: 24); see section
CONTROL PANEL.
Start programme
Press "Start/Pause" button to start (fig.: 25) .
The Appliance operates according to present set-
tings. Changes are only possible by cancelling the pro-
gramme.
After a few minutes the display will show Auto to indi-
cate that AUTO load detection system is working (see
section SUGGESTIONS AN TIPS).
Interrupt/ change/ cancel a programme
To interrupt a running programme press "Start/Pause".
The LED of this button is flashing.
Changes or setting a new programme are now possi-
ble. Press the button "Start/Pause" again to continue
the programme with the new settings.
Hold the button „On/Off" in order to cancel the pro-
gramme.
Daily use
22
24
Start/Pause
Temp. Dry Level Intense Extra rinse
.
23
25
19