Coolcloud Hvac Phone Application - Amana AVPEC Series Installation & Operating Instructions Manual

2. Firmly touch a clean, unpainted, metal surface of
the air handler blower near the control. Any tools
held in a person's hand during grounding will be dis-
charged.
3. Service integrated control module or connecting
wiring following the discharge process in step 2.
Use caution not to recharge your body with static
electricity; (i.e., do not move or shuffle your feet, do
not touch ungrounded objects, etc.). If you come in
contact with an ungrounded object, repeat step 2
before touching control or wires
4. Discharge your body to ground before removing
a new control from its container. Follow steps 1
through 3 if installing the control on a blower. Return
any old or new controls to their containers before
touching any ungrounded object.
DIP Switch Setting
AVPEC25B14 AVPEC37C14 AVPEC59D14 AVPEC61D14
Fi rs t Va l i d Hea ter Ki t
Second Va l i d Hea ter Ki t
Thi rd Va l i d Hea ter Ki t
Fourth Va l i d Hea ter Ki t
Fi fth Va l i d Hea ter Ki t
Si xth Va l i d Hea ter Ki t
Seventh Va l i d Hea ter Ki t
Heater Kit Options
Heater Kit Options
FRONT VIEW
FEMALE CONNECTIONS
AVPEC MOTOR ORIENTATION
FIGURE 15

16 CoolCloud HVAC Phone Application

NOTE: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
MODEL
3 3/5 3/5
5 6 6
6 8 8
8 10 10
10 15 15
X 19 20
X X X
TABLE 9
SIDE VIEW
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-
ceiver.
• Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV techni-
cian for help.
Actual screens may look different based on the mobile de-
vice being used.
3/5
6
8
10
15
20
25
This air handler is Bluetooth ready and functions with the
CoolCloud HVAC phone application designed to improve
the contractor's setup / diagnostic experience. Users can
see specific model information, review active diagnostic er-
ror codes, observe system menu testing of all operational
modes (heat / cool / fan) directly from the phone. The phone
application is also capable of directly updating the air han-
dler software anytime updates are available. The application
will automatically notify the user.
NOTE: The software update may take up to 20 minutes to
complete.
13
FIGURE 16