Adding Channels To The Tv's Memory - Toshiba 27DF47 Owner's Manual

Adding channels to the TV's memory

When you press Channel ▲ / ▼ on the TV or CH ▲ / ▼ on the remote
control, your TV will stop only on the channels you have programmed into
the TV's channel memory. Follow the steps below to program channels
into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them
in its memory. After the TV has stored the channels in its memory
automatically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
or
2. Press
selection is highlighted.
3. Press or
CABLE, depending on which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press until the CH PROGRAM selection
is highlighted.
5. Press to start channel
programming. The
TV will automatically
cycle through all the
TV or Cable channels
(depending on which
you selected), and store
all active channels in the channel memory.
6. When channel programming is complete, the message
"COMPLETED" appears.
7. Press CH ▲ or ▼ to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specifi c channels manually.
To add or erase channels manually (analog mode):
1. Press ANALOG/DIGITAL to select the analog mode.
2. Press MENU then press
or
3. Press
4. Press to display the ADD/ERASE menu.
5. Select the desired channel to be
memorized or deleted using
Press or
ERASE.
6. Repeat step 5 for other channels you
want to add or erase.
7. Press MENU repeatedly until the menu
screen is cleared.
Note: To return to normal viewing immediately, press EXIT.
30J-01(C)_EN.indb 14 30J-01(C)_EN.indb 14
or
to display the SETUP menu.
until the TV/CABLE
to select either TV or
L A N G U A G E /
C L O C K S E T
T V / C A B L E
C H P R O G R A M
L A N G U A G E /
C L O C K S E T
T V / C A B L E
C H P R O G R A M
C H P R O G R A M
A N A L O G C H S E A R C H
S T O P : M E N U
Analog tuning
or
to display the OPTION menu.
until the ADD/ERASE selection is highlighted.
A D D / E R A S E
SAP
C L O S E D C A P T I O N
V - C H I P
A U T O S H U T O F F
or .
to select either ADD or
Note:
If the desired channel is not stored in the
channel memory, add the channel manually
(see "Adding and erasing channels manually,"
below).
I D I O M A / L A N G U E
C A B L E
/ / / / M E N U
I D I O M A / L A N G U E
C A B L E
/ / / M E N U
C H P R O G R A M
D I G I T A L C H S E A R C H
S T O P : M E N U
Digital tuning
OFF
O F F
/ / / M E N U
A D D / E R A S E
A N A L O G
C H
0 0 1 E R A S E
0 0 2 A D D
0 0 3 E R A S E
0 0 4 A D D
/ / / / E N T E R
14
CH
EXIT
MENU
ANALOG/
DIGITAL
9/3/2550 16:37:40 9/3/2550 16:37:40