Installing The Recoil-Starter Rope In The Rope Guide; Filling The Engine With Oil - Toro 20955 Operator's Manual

1. Handle knob
5. Loosely install the handle knobs onto the
carriage bolts.
6. Refer to steps 3 through 5 of
Handle Height (page
2
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the
recoil-starter rope in the rope guide.
Hold the blade-control bar to the upper handle and
pull the recoil-starter rope through the rope guide on
the handle (Figure 7).
Figure 6
2. Carriage bolt
Adjusting the
12).
1. Recoil-starter rope
3
g032869

Filling the Engine with Oil

No Parts Required
Procedure
Important:
Your machine does not come with oil
in the engine, but it does come with a bottle of oil.
Before starting the engine, fill the engine with oil.
Engine Oil Specifications
Engine oil capacity
Oil viscosity
API service classification
1. Move the machine to a level surface.
2. Remove the dipstick by rotating the cap
counterclockwise and pulling it out
7
Figure 7
2. Rope guide
0.44 L (15 fl oz)
SAE 30 or SAE 10W-30
detergent oil
SJ or higher
(Figure
g003251
8).