Toro 20955 Operator's Manual page 20

Figure 27
1. Electric starter
2. Remove and save the 2 handle knobs and 2
carriage bolts from the handle brackets
28).
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
Figure 28
1. Handle knob
3. Fold the handle by rotating it forward
g035929
2. Electric-start button
(Figure
g032869
2. Carriage bolt
(Figure 29).
1. Operating position
4. Insert the carriage bolt (with the bolt head toward
the inside) through the handle bracket and the
upper hole in the handle end. Ensure that the
square edges of each carriage bolt fits into the
upper or lower square hole in its related handle
bracket (Figure
1. Handle knob
5. Loosely install the handle knobs and carriage
bolts on the handle brackets.
6. To unfold the handle, refer to
Unfolding the Handle (page
19
Figure 29
2. Folded position
30).
Figure 30
2. Carriage bolt
1 Assembling and
6).
g032870
g032865