Using The Appliance - Beko HNT 62210 B User Manual

3

Using the Appliance

3.1 Controlling the Appliance
Lamp button
To turn on the product lamp put the
switch in lamp position. The slider set
should be in pulled position in order-
to turn on the lamp.
1st and 2nd speed switch.
Put the switch in up position to ope-
rate the product in the 1st speed and
in down position to operate in the
2nd speed.
3. Speed switch
Put the switch in down position to ope-
rate the product in the 3rd speed.
3.2 Energy efficient usage:
• When operating the hood, adjust the speed
level according to the odour and vapour inten-
sity in order to prevent unnecessary power con-
sumption.
• Use low speeds in normal conditions (1–2), and
high speed (3) when smell and vapours are in-
tensified.
• Lamps on the hood are intended for illuminating
the cooking zone.
• Using them to illuminate the ambient/kitchen
will result in unnecessary power consumption
and inadequate illumination.
3.3 Handling the hood.
• Hood is equipped with a motor having various
speed settings.
• For a better performance, we advise you to use
Hood / User Manual
low speeds in normal conditions, and high spe-
eds when smell and vapours are intensified.
• You can start the hood by pressing the desired
speed level key. (B, C, D)
• You can illuminate the cooking area by pressing
the light key. (A):
3.4 Replacement of LED lamp
To replace the LED lamps, press the rear holder
section of the lamp downwards and pull out the
lamp towards the bottom direction and slightly
rotate in a counter clockwise direction to remove
it.
Max 3W
Bulb
Bulb Power (W)
Holder / Socket
Bulb Voltage (V)
Size (mm)
ILCOS Code
3
GZ 10
220 - 240
53 x 50
DR/F3-220-240-
GZ10-50-53
9 / EN