Operation Of The Appliance - Beko HNS 61212 XH User Manual

3

Operation of the appliance

3.1 Controls panel
L Light
Switches the lighting system on and off
V Speed
Sets the operating speed of the extractor:
0. Switches the extractor motor on and off
1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour.
2. Medium speed, suitable for most operating conditions given the optimum treated air flow/noise
level ratio.
3. Maximum speed, used for eliminating the highest cooking vapour emission, including long periods.
• The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.
• Never use the hood for purposes other than for which it has been designed.
• Never leave high naked flames under the hood when it is in operation.
• Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not
engulf the sides.
• Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.
3.2 Energy efficient usage
• When using your appliance, adjust the speed settings according to vapour and odour intensity, in
order to save energy.
• Use low speeds (1-2) under normal conditions, and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminating the cooking area.
• Using them for environmental lighting shall cause unnecessary energy expenditure and insufficient
lighting.
3.3 Lamp replacement
• Before replacing the light bulbs, disconnect the power supply of the hood.
A
• Do not touch the light bulbs when they are hot.
• Be careful not to touch the replaced light bulb directly with hands.
C
• You may procure lamps from Authorised Service Agents.
• Candle type LED lamp is used in this product
• Max 4 W lamp must be used when the change of lamp
Cooker Hood / User Manual
9 / EN