System Faults - BRP EVINRUDE E-TEC ICON TOUCH 4.3 CTS Display User Manual

System Faults

System faults are generated by the outboard and the remote control. When an active or
current fault is broadcast on the network by a remote control or outboard, the display will:
1. Take no action unless the display is in Diagnostic or System mode. In those instances,
the faults will be displayed.
2. Indicate an existing warning by highlighting an Outboard Status Indicator on the
Status Bar.
Status Bar
3. Initiate a pop-up with the appropriate information displayed. The pop-up color will be
orange. In addition, the appropriate Outboard Status Indicator in the Status Bar will be
highlighted.
4. Initiate a pop-up with the appropriate information displayed. In addition, the Audible
Alarm Drive Output will be set to sound an audible user alert. The pop-up color will be
red. In addition, the appropriate Outboard Status Indicator in the Status Bar will be
highlighted.
Touch the icon (if highlighted) to open a Pop-up warning.
5
356595-03