Installation; Package Contents; Mounting The Display - BRP EVINRUDE E-TEC ICON TOUCH 4.3 CTS Display User Manual

Installation

Package Contents

•
ICON TOUCH 4.3 CTS Digital Display
•
Harness Assembly (1X) – P/N 767751
•
10-32 Mounting studs and (4X)
•
10-32 nuts with lock washers (4X )
•
Weather Plug (2X) – P/N 765975
•
User's Guide – P/N 356595
•
Tee Connector – P/N 764151 (1X)
•
GPS Antenna – P/N 767488 (1X)
•
Warning Horn – P/N 176360 (1X)
•
Butt Connector – P/N 766533 (2X)
•
Y-Harness – P/N 587230 (1X)

Mounting the Display

1. Identify the mounting location. Allow a minimum of 6.0 in. (152.4 mm) behind the
mounting surface for harness connection and routing.
2. Use the mounting template. Cut/drill the openings to the specified dimensions.
3. Assemble mounting studs to the display at the locations shown below. Tighten the
studs securely.
32
356595-23