Home 2 - BRP EVINRUDE E-TEC ICON TOUCH 4.3 CTS Display User Manual

• Fuel Economy – miles per gallon (MPG) – requires Speed Over Ground input (from
GPS antenna) or Speed Over Water (SOW) input
o Speed Over Water input requires the use of one of the following transducers:
 BRP P/N 764671 – Transom mount (speed, depth, temp) transducer
 BRP P/N 764673 – Thru hull (speed, depth, temp) transducer
 BRP P/N 765150 – Transom mount (speed only) transducer

Home 2

For single outboard applications only:
From any page, press the Home button two times.
The data shown is:
• RPM
• Trim %
• Speed Over Ground – requires GPS speed input
• Water Pressure – requires 0-50 psi pressure input transducer, use BRP P/N 5008640
Water Pressure
Troubleshooting Tip
Problem
Water pressure does not
display or is not accurate.
11
356595-07
Solution
Reset the water pressure
range; use Evinrude
Diagnostic software (see your
dealer).