4. Place the display in the opening so the bezel is flush with the dashboard.
5. Use the nuts with lock washer to secure the display. Tighten the nuts securely.
Harness and Weather Plug Connections
Rear view shown.
NOTE:
Install the weather plugs, P/N 765975, to ports A and D. Do not allow the ports to remain
uncovered.
Port A is used for firmware updates – see your dealer.
Port D is not used or supported by BRP.
Connect plug C to this port.
This mounting boss is not used or supported by
Connect plug B to this port.
33
356595-23
BRP.