Display Mode Selections; Unit Selection - BRP EVINRUDE E-TEC ICON TOUCH 4.3 CTS Display User Manual

Display Mode Selections

The display modes control specific characteristics including language and unit selection.
These modes and functions are included in the Setup screen.

• Unit Selection

o U.S. (this is the default choice when the gauge is initially powered on)
o Metric
o Imperial
o Nautical (this choice is only available for depth, speed, and distance indications)
• Language Selection
o English – EN, French – FR, Spanish – ES, Italian – IT, German – DE
• 12 / 24 Hour Time Display
• Universal Time Offset
Unit Selection
Use the Setup screen to select the units of measure for selected data. Selections are retained
when the display is turned OFF. Nautical is a sub-choice of U.S., Metric, or Imperial. The
default units of measurement are U.S. The following units apply:
U.S.
Degrees Fahrenheit
Feet (depth)
Gallons per Hour
Miles per Gallon
Miles per Hour
percent
Pounds per Square Inch
Revolutions per Minute
Volts
Miles
Month, Day, Year
Metric
Degrees Celsius
meters
Liters per hour
Liters per 100 Kilometers
Kilometers per Hour
percent
kilopascals
Revolutions per Minute
Volts
Kilometers
Day, Month, Year
Nautical
fathoms
Nautical miles per
Knots
percent
Revolutions per Minute
Volts
Nautical Miles
4
Imperial
Degrees Celsius
Feet
Imperial gallons per hour
Miles per Imperial gallon
Miles per Hour
percent
Pounds per Square Inch
Revolutions per Minute
Volts
Miles
Day, Month, Year