A pop-up and audible warning will remain in effect until acknowledged by the operator by
touching the pop-up area. As long as the fault is active, the pop-up may be re-initiated by
touching the right-hand side of the Outboard Status Indicator area of the Status Bar.
Turning the Display ON
Turn the key switch to the ON position or start the outboard to turn the display ON.
Troubleshooting Tip
Using the Display
Use the Quick Access buttons to access a screen. Use the on-screen Touch Point icons to
access a screen or select a specific feature.
Quick Access Buttons and Icons
Press a button or on-screen icon to access its associated screen.
Home
Outboard
Fluid Tanks
Menu
Display does not power ON.
Buttons
Problem
Icons
6
Solution
Charge the network power
supply battery to a minimum
of 12.5V.
Disconnect wiring harness
from back of gauge, and then
securely reconnect it.
Buttons
ECO
Trip
Vessel
Modes
356595-02