Fluid Tank Calibration - BRP EVINRUDE E-TEC ICON TOUCH 4.3 CTS Display User Manual

Fluid Tank Calibration

Control Head Inputs:
There are four control head fluid level inputs. Their connections are located on the remote
control wiring harness. These inputs connect to a fuel level or oil level sending unit.
The tank fill choices are Fuel and Oil.
In the Calibrations screen, touch the Fluid Tank icon to set the Fluid Tank Calibration. Touch
the required tank icon (1, 2, 3, or 4) on the bottom of the screen to reconfigure or recalibrate
the selected tank.
FLUID TANKS icon
356595-15
Follow the pop-up menu instructions on the screen.
22