Technical Specifications And Tolerances; Type Plate - Javo Matrix User Manual

1 Technical specifications and tolerances

This machine is intended to be used for filling trays automatically with substrate only. This machine is meant for
processing trays, substrate and other materials that are described in this manual only. Detailed operation of the
machine is described in section "Operation".
This machine may be used only within the limits for specifications and tolerances of the order, on the
assembly drawing and indicated in this manual. If the machine is used outside these specifications, Javo BV
can not take responsibility for this machine.
This machine is intended for products as agreed in the order confirmation only. To ensure the proper
operation of this machine, only products with specifications and tolerances as specified in the order may be
used.
Do not use the machine for purposes other than the intended purpose of Javo BV. This can lead to damage
and danger to the operator and its
This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE
marked before using this machine. Untill proper CE Marking of the line is carried out, commissioning of this
machine is prohibited.
Specifications
Machine appropriate for
Capacity
Voltage
Machine connection
Power consumption
Weight
Dimensions (LxWxH)
Height conveyor
Content substrate bin
Conveyor-belt in
Conveyor-belt out
Format-set
Year of construction
Type product
* Several crates per stroke possible
** Other possible in consultation

1.1 Type plate

The type plate is placed onto the main cabinet door.
Version 2016-2
environment.
Pots in trays
Tray length < 600 mm
Tray width < 400 mm
Tray height 55-200 mm
*450 strokes per hour
**400Volt 50Hz 3~+N+ PE
16A 5pole CEE connector
4 kW
± 1200 kg
5000x3400x1935 mm
.. mm
700 Litre
1500x400mm
2500x400mm
6 plates
See type plate
As agreed in the order confirmation.
User Manual Javo Matrix
4