Table of Contents
Advertisement
5 Mounting, installation and commissioning
Follow all instructions described in this manual, in particular chapter safety.
This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE
marked before using this machine. Up to CE Marking of the line, commissioning of this machine is prohibited.
The automatic moving arms move trays in and out the filler, are pinnate suspended to avoid serious injury
when touched. Nevertheless it is possible to get injured when touching. Stay away from moving parts while
the machine is turned on.
5.1 Placement
The machine must be placed on a flat surface, with sufficient weight capacity. Install the machine so that there is
enough space left for service providing, safe instructions and / or cleaning, maintenance and / or inspections. Put the
brakes on the castors before the machine is turned on.
This machine is not suitable to be used in the open air. Electrical components are only splashproof. Keep the
machine away from rain and moisture. When using the machine in a humid location is unavoidable, you
should use an RCD.
5.2 Facilities to take care of by the user
Prior to delivery of the machine, the required materials and facilities (air, power, substrate, etc.) needs to be present
within 3 meters of machine.
5.3 Mounting / Connecting
If applicable, the components supplied are to be mounted on the machine. Make sure that the moving parts are
free. If the machine is complete, it can be connected (by a competent person) to the power supply.
Keep hands, hair, loose clothing and / or jewellery away from moving parts of the machine. Wear
appropriate clothing without loose parts. Wear non-slip work shoes.
As long as the machine is on, no connection or safety devices may be removed. The machine may only be
used when all protective devices and safety-related facilities are available and ready for use.
Version 2016-2
User Manual Javo Matrix
12
Advertisement
Table of Contents
