Table of Contents
Advertisement
8 Disposal of machine or machine parts
Follow all instructions described in this manual, in particular chapter safety.
Perform the following steps when disposing the machine:
1. Decommission the machine and remove electric and pneumatic power.
2. Drain and remove all consumables.
3. Scrap the machine according to the local legislation.
9 EG-conformity statement
EG-conformity statement for machines (directive 2006/42/EG, annex II, under A.)
Javo BV
Westeinde 4
2211XP Noordwijkerhout
The Netherlands
Declares that:
Machine:
Type:
is in accordance with the Machine directive 2006/42/EG and complies with the provisions of the EMC-directive
2004/108/EEG
Complies with the harmonized European Standards:
Harmonized
definition
European standard
Safety of machinery - Basic concepts,
NEN-EN-ISO
general principles for design - Part 1:
12100:2010
Basic terminology, methodology
Safety of machinery - Safety distances
NEN-EN-ISO 13857
to prevent hazard zones being reached
by the upper and lower limbs
Safety of machinery - Electrical
NEN-EN-IEC 60204-1
equipment of machines - Part 1:
General requirements
The Netherlands, Noordwijkerhout,
October 2014
Version 2016-2
Matrix
Harmonized
definition
European standard
NPR-ISO/TR 14121-
Safety of machinery - Risk assessment - Part 2:
2:2010
Practical guidance and examples of methods
Safety of machinery - Parts of Control Systems
NEN-EN-ISO 13849-1
with a safety function - Part 1: General
principles for design
Safety of machinery - Emergency stop -
NEN-EN 13850
Principles for design
User Manual Javo Matrix
Cees Bouwmeester
Director
20
Advertisement
Table of Contents
