Table of Contents
Advertisement
Quick Links
The information provided herein may not be reproduced and/or published in any form, by print, photo print, microfilm or any other means
whatsoever (electronically or mechanically) without the prior written authorisation of JAVO BV.
User Manual
Original document
version 2016-2
Matrix
Javo BV
PO Box 21
2210 AA Noordwijkerhout
Holland
T: +31 (0)252 343121
F: +31 (0)252 377423
info@javo.eu
www.javo.eu
© All rights reserved
Advertisement
Table of Contents
Summary of Contents for Javo Matrix
- Page 1 © All rights reserved The information provided herein may not be reproduced and/or published in any form, by print, photo print, microfilm or any other means whatsoever (electronically or mechanically) without the prior written authorisation of JAVO BV.
- Page 2 Javo BV is not responsible for any errors in this manual or the consequences thereof. Javo BV is not liable for damage or consequential damage caused by operating errors, lack of expert maintenance and any use other than described in this manual.
-
Page 3: Table Of Contents
User Manual Javo Matrix Table of contents Technical specifications and tolerances ......................4 Type plate ................................4 Safety ................................5 Provisions ................................5 Safety devices on the machine ......................... 6 Explanation of icons and symbols ........................6 Description of the manchine ......................... 7 ...................................... - Page 4 User Manual Javo Matrix Drawings and schemes............................ 19 Spare parts ..............................19 JavoNet ................................19 Customer support and advice ......................... 19 Disposal of machine or machine parts ......................20 EG-conformity statement ..........................20 Version 2016-2...
-
Page 5: Technical Specifications And Tolerances
Do not use the machine for purposes other than the intended purpose of Javo BV. This can lead to damage and danger to the operator and its environment. -
Page 6: Safety
This machine is suitable for process and environmental conditions as stated in section "Specifications and Tolerances" of this manual only. Any other use is not authorized by Javo BV and this allows the operator and / or the environment at risk. -
Page 7: Safety Devices On The Machine
User Manual Javo Matrix 2.2 Safety devices on the machine Caps and doors are screening moving parts. Always place back caps and close doors before the machine is turned on. Caps and doors should remain closed while operating the machine. -
Page 8: Description Of The Manchine
User Manual Javo Matrix 3 Description of the manchine 3.1 Machine overview A. Substrate bin B. Elevator C. Exit substrate D. Substrate entrance in carousel E. Brush unit F. Format-set plates exchange position G. Format-set plate H. Substrate retour conveyor... -
Page 9: Outline Drawing With Main Dimensions
User Manual Javo Matrix 3.2 Outline drawing with main dimensions 5000 Version 2016-2... -
Page 10: Options
User Manual Javo Matrix 3.3 Options Depending on the intensity of use and customer requirements, this machine can be equipped with various options. Contact your sales consultant. Options Code Specifications 4 meter 5x1.5 cable incl. 16A plug 900965 10mtr 5x1.5 cable, incl. plug and connector 901467 20mtr 5x1.5 cable, incl. -
Page 11: Controls
User Manual Javo Matrix 3.6 Controls The machine is controlled with the control panel. This control panel is flexible around the machine to be used by means of a cable. The control panel consists of the following buttons; A. Emergency stop button B. -
Page 12: Transport
4 Transport Follow all instructions described in this manual, in particular chapter safety. On delivery of the machine, a Javo mechanical engineer must be present to unload the machine from the (freight) wagon. Prior to moving the machine, the electrical and pneumatic power should be disconnected. Make sure the cables are stowed sufficiently. -
Page 13: Mounting, Installation And Commissioning
User Manual Javo Matrix 5 Mounting, installation and commissioning Follow all instructions described in this manual, in particular chapter safety. This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE marked before using this machine. Up to CE Marking of the line, commissioning of this machine is prohibited. -
Page 14: Placing Format-Set Plates
User Manual Javo Matrix 5.4 Placing format-set plates For placing Format-sets, the machine fence can be removed. The machine will stop automatically. To rotate the carousel to the next position, use the 2-hand control buttons. Placing format-set plates is easy. The dowel pins on the plates should be placed in the recesses. -
Page 15: Check Elevator Chain Tension
User Manual Javo Matrix 5.7 Check elevator chain tension Check the elevator chain tension before you start working with the machine. Procedure: 1. Check the elevator chain tension. The correct tension is obtained when the chain in the middle deflects ± 10mm. -
Page 16: Set Compactor Height
User Manual Javo Matrix 5.10 Set compactor height Set the compactor height before you start working with the machine. Procedure: 1. Check the compactor height with respect to the tray. The compactor should not touch the format-set plates. There should be a gap of about 10mm. -
Page 17: Operation
User Manual Javo Matrix 6 Operation Follow all instructions described in this manual, in particular chapter safety. Keep hands, hair, loose clothing and / or jewelry away from moving parts of the machine. Wear appropriate clothing without loose parts. Wear non-slip work shoes. -
Page 18: Maintenance
User Manual Javo Matrix 7 Maintenance Follow all instructions described in this manual, in particular chapter safety. Maintenance of this machine must be performed in compliance with warnings on the machine and in accordance with the user manual by qualified personnel. -
Page 19: Elevator Cleaning
4. Press the reset button emergency stop circuit. All possibly connected conveyors start moving. 5. Start the machine The machine must not be used when going through the above process, the machine responds differently than described above. Warn directly Javo BV. 7.5 Fault list Problem... - Page 20 Only original spare parts and accessories of Javo BV may be used on the machine. Javo BV advises you to take certain parts in stock because of wear sensitivity and / or any expected downtime for re- ordering of the parts.
- Page 21 User Manual Javo Matrix 8 Disposal of machine or machine parts Follow all instructions described in this manual, in particular chapter safety. Perform the following steps when disposing the machine: 1. Decommission the machine and remove electric and pneumatic power.