Installation - Hanseatic HGTI6082C14T7735ES User Manual

Recess dimensions

Installation

NOTICE
Risk of damage!
Selecting the wrong screws can dam-
age the worktop.
Use the screws which are supplied in
■
the delivery or screws of an appropri-
ate length.
Requirements:
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
Installation, connection and initial commissioning
90°
820 mm
580 mm
Inlet/outlet area
and electrical con-
nection.
600 mm
90°
80 mm
100 mm
1. Switch the fuse off.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside, if you have
not already done so.
(c)
3. Affix the enclosed protective film (c) to the
bottom of the work surface. In this way,
you will avoid damage to the work surface
as a result of hot steam which may be
emitted from the dishwasher if the appli-
ance door is left open.
Page EN-31