Table of Contents
Advertisement
RELIANCE INDUSTRIES, LLC
DEER PARK, TX 77571
PH. (888) 362-2826
WARNING
READ USER MANUAL AND
RELIANCE INDUSTRIES, LLC
LABELS. FAILURE TO
DEER PARK, TX 77571
OBSERVE INSTRUCTIONS
PH. (888) 362-2826
OR WARNINGS COULD
WARNING
RESULT IN SERIOUS IN-
READ USER MANUAL AND
JURY OR DEATH.
LABELS. FAILURE TO
DO NOT USE FOR
OBSERVE INSTRUCTIONS
FALL ARREST FOR
OR WARNINGS COULD
MORE THAN ONE
RELIANCE INDUSTRIES, LLC
RESULT IN SERIOUS IN-
PERSON.
JURY OR DEATH.
DEER PARK, TX 77571
SRL MUST BE USED
DO NOT USE FOR
WITH A FULL-BODY
PH. (888) 362-2826
FALL ARREST FOR
WARNING
HARNESS.
MORE THAN ONE
INSPECT BEFORE
READ USER MANUAL AND
PERSON.
EACH USE.
LABELS. FAILURE TO
SRL MUST BE USED
IF THIS UNIT HAS BEEN
OBSERVE INSTRUCTIONS
WITH A FULL-BODY
OR WARNINGS COULD
SUBJECTED TO A FALL
HARNESS.
RESULT IN SERIOUS IN-
ARREST, REMOVE FROM
INSPECT BEFORE
JURY OR DEATH.
SERVICE.
EACH USE.
DO NOT USE FOR
DO NOT INSTALL OR USE NEAR
IF THIS UNIT HAS BEEN
FALL ARREST FOR
ELECTRICAL HAZARDS OR SHARP
SUBJECTED TO A FALL
MORE THAN ONE
SURFACES.
ARREST, REMOVE FROM
PERSON.
SERVICE.
SRL MUST BE USED
MEETS OR EXCEEDS OSHA REGULATIONS
DO NOT INSTALL OR USE NEAR
WITH A FULL-BODY
ELECTRICAL HAZARDS OR SHARP
HARNESS.
SURFACES.
INSPECT BEFORE
EACH USE.
MEETS OR EXCEEDS OSHA REGULATIONS
IF THIS UNIT HAS BEEN
PATENT PENDING
SUBJECTED TO A FALL
MADE IN USA
ARREST, REMOVE FROM
SERVICE.
DO NOT INSTALL OR USE NEAR
ELECTRICAL HAZARDS OR SHARP
SURFACES.
MEETS OR EXCEEDS OSHA REGULATIONS
Page 24
PRODUCT LABELS
WARNING
INSPECT UNIT BEFORE
EACH USE TO VERIFY
LOCK-UP. SRL MUST BE
INSPECTED AT LEAST
WARNING
ONCE A MONTH BY A
INSPECT UNIT BEFORE
COMPETENT PERSON.
EACH USE TO VERIFY
DO NOT USE IN
LOCK-UP. SRL MUST BE
PLACES WHERE
INSPECTED AT LEAST
THERE IS A POS-
ONCE A MONTH BY A
SIBILITY OF SLOW
COMPETENT PERSON.
ENGULFMENT FROM
DO NOT USE IN
SHIFTING CONTENTS.
PLACES WHERE
WARNING
INSPECT ATTACHMENT
THERE IS A POS-
AT SNAP TO BE SURE IT
INSPECT UNIT BEFORE
SIBILITY OF SLOW
CANNOT LOAD SNAP
EACH USE TO VERIFY
ENGULFMENT FROM
GATE IN A MANNER
LOCK-UP. SRL MUST BE
SHIFTING CONTENTS.
THAT COULD CREATE
INSPECTED AT LEAST
INSPECT ATTACHMENT
ACCIDENTAL DISENGAGE-
ONCE A MONTH BY A
AT SNAP TO BE SURE IT
MENT. NEVER ALLOW TO
COMPETENT PERSON.
CANNOT LOAD SNAP
DO NOT USE IN
RETRACT UNCONTROLLABLY. REDUCE
GATE IN A MANNER
PLACES WHERE
SWING FALL BY KEEPING WORKER
THAT COULD CREATE
THERE IS A POS-
BENEATH THIS DEVISE. DO NOT
ACCIDENTAL DISENGAGE-
SIBILITY OF SLOW
CLIMB ABOVE ANCHORAGE.
MENT. NEVER ALLOW TO
ENGULFMENT FROM
RETRACT UNCONTROLLABLY. REDUCE
SHIFTING CONTENTS.
PATENT PENDING
SWING FALL BY KEEPING WORKER
INSPECT ATTACHMENT
MADE IN USA
BENEATH THIS DEVISE. DO NOT
AT SNAP TO BE SURE IT
CLIMB ABOVE ANCHORAGE.
CANNOT LOAD SNAP
GATE IN A MANNER
4006, 4007, 4008, 4009, 4011
THAT COULD CREATE
ACCIDENTAL DISENGAGE-
MENT. NEVER ALLOW TO
RETRACT UNCONTROLLABLY. REDUCE
SWING FALL BY KEEPING WORKER
BENEATH THIS DEVISE. DO NOT
CLIMB ABOVE ANCHORAGE.
PATENT PENDING
MADE IN USA
4015, 4020
MAXIMUM WORKING LOAD (INCL. TOOLS): 1 PERSON (90-LB. MIN., 310-LB. MAX.) MAX. ARREST DIST.: 3.5-FT. (42-IN.)
PART # SRL LINE MATERIAL
4010 3/16-IN. WIRE ROPE, GALV.
4011 1-IN. WIRE X .050-IN. DYNEEMA
4012 1-IN. WIRE X .050-IN. DYNEEMA
MAXIMUM WORKING LOAD (INCL. TOOLS): 1 PERSON (90-LB. MIN., 310-LB. MAX.) MAX. ARREST DIST.: 3.5-FT. (42-IN.)
PART # SRL LINE MATERIAL
MIN. BREAK SNAPHOOK EXTERNAL SHOCK WORK LENGTH ANSI Z359
4010 3/16-IN. WIRE ROPE, GALV.
3,400-LB.
4011 1-IN. WIRE X .050-IN. DYNEEMA
5,000-LB.
4012 1-IN. WIRE X .050-IN. DYNEEMA
5,000-LB.
MAXIMUM WORKING LOAD (INCL. TOOLS): 1 PERSON (90-LB. MIN., 310-LB. MAX.) MAX. ARREST DIST.: 3.5-FT. (42-IN.)
PART # SRL LINE MATERIAL
4010 3/16-IN. WIRE ROPE, GALV.
MAXIMUM WORKING LOAD (INCL. TOOLS): 1 PERSON (90-LB. MIN., 310-LB. MAX.) MAX. ARREST DIST.: 3.5-FT. (42-IN.)
4011 1-IN. WIRE X .050-IN. DYNEEMA
PART # SRL LINE MATERIAL
4012 1-IN. WIRE X .050-IN. DYNEEMA
4006 3/16-IN. WIRE ROPE, GALV.
4007 1-IN. WIRE X .050-IN. DYNEEMA
4008 1-IN. WIRE X .050-IN. DYNEEMA
4009 1-IN. WIRE X .050-IN. DYNEEMA
MAXIMUM WORKING LOAD (INCL. TOOLS): 1 PERSON (90-LB. MIN., 310-LB. MAX.) MAX. ARREST DIST.: 3.5-FT. (42-IN.)
PART # SRL LINE MATERIAL
4006 3/16-IN. WIRE ROPE, GALV.
4007 1-IN. WIRE X .050-IN. DYNEEMA
4008 1-IN. WIRE X .050-IN. DYNEEMA
4009 1-IN. WIRE X .050-IN. DYNEEMA
MAXIMUM WORKING LOAD (INCL. TOOLS): 1 PERSON (90-LB. MIN., 310-LB. MAX.) MAX. ARREST DIST.: 3.5-FT. (42-IN.)
PART # SRL LINE MATERIAL
4006 3/16-IN. WIRE ROPE, GALV.
4007 1-IN. WIRE X .050-IN. DYNEEMA
4008 1-IN. WIRE X .050-IN. DYNEEMA
4009 1-IN. WIRE X .050-IN. DYNEEMA
MIN. BREAK SNAPHOOK EXTERNAL SHOCK WORK LENGTH ANSI Z359
3,400-LB.
3005
YES
10-FT.
5,000-LB.
3005
YES
11-FT.
5,000-LB.
3014
YES
11-FT.
3005
YES
10-FT.
YES
3005
YES
11-FT.
YES
3014
YES
11-FT.
NO
MIN. BREAK SNAPHOOK EXTERNAL SHOCK WORK LENGTH ANSI Z359
3,400-LB.
3005
YES
10-FT.
5,000-LB.
3005
YES
11-FT.
MIN. BREAK SNAPHOOK EXTERNAL SHOCK WORK LENGTH ANSI Z359
5,000-LB.
3014
YES
11-FT.
3,400-LB.
3005
NO
5,000-LB.
3005
NO
5,000-LB.
3011
NO
5,000-LB.
3014
NO
MIN. BREAK SNAPHOOK EXTERNAL SHOCK WORK LENGTH ANSI Z359
3,400-LB.
3005
NO
6-FT.
5,000-LB.
3005
NO
7-FT.
5,000-LB.
3011
NO
7-FT.
5,000-LB.
3014
NO
7-FT.
MIN. BREAK SNAPHOOK EXTERNAL SHOCK WORK LENGTH ANSI Z359
3,400-LB.
3005
NO
5,000-LB.
3005
NO
5,000-LB.
3011
NO
5,000-LB.
3014
NO
YES
YES
NO
YES
YES
NO
6-FT.
YES
7-FT.
YES
7-FT.
YES
7-FT.
NO
YES
YES
YES
NO
6-FT.
YES
7-FT.
YES
7-FT.
YES
7-FT.
NO
Advertisement
Table of Contents
